Victron Battery Management System and Monitoring Kit
Victron Battery Management and Monitoring System
Ultimate Control and Monitoring with the Victron VE.Bus BMS system along side the Cerbo GX and SmartShunt. This will allow you to remotely monitor you installation using either the Bluetooth or WIFI capability.
Kit Contents
- VE.Bus BMS with AC Detector
- 65amp Smart BatteryProtect
- 500A IP65 SmartShunt
- Cerbo GX
- Touch50 Display
- VE.Direct Cable
Victron VE.Bus BMS Battery Management System
VE.Bus BMS is a Battery Management System (BMS) designed to interface with and protect a single, or multiple Victron Lithium Battery Smart 12,8V & 25,6V (LiFePO4 or LFP) in systems that have Victron inverters or inverter/chargers with VE.Bus communication.
It monitors and protects the batteries against over voltage and under voltage of any individual cell, and also over temperature or under temperature conditions.
Based on the status of the battery or batteries, the BMS will:
- Generate a pre-alarm signal to alert of an imminent cell under voltage condition.
- Disable inverting in VE.Bus inverters or inverter/chargers via VE.Bus, and disable other loads via the 'Load Disconnect' terminal in the event of a cell under voltage condition.
- Disable charging in VE.Bus inverters or inverter/chargers via VE.Bus and disable other chargers via the 'Charge Disconnect' terminal in the event of a cell overvoltage, under temperature or over temperature condition.
- Remote on/off terminals.
- Ability to disable VE.Direct and VE.Can solar chargers via a GX device.
- Allowing control of the VE.Bus inverter/charger from multiple devices, like the Digital Multi Control, the VE.Bus Smart dongle and/or a GX device.
- Auxiliary power input and output terminals that allow a GX device to remain powered in the event of a system shutdown.
Part Number BMS300200200
Victron IP65 500A / 50mV SmartShunt - Bluetooth Enabled
IP65 Water Proof - ideal for Boats
- Alternative to BMV-712 Battery Monitor
- Smart Enabled Bluetooth for VictronConnect App
- GX Device Connectivity via VE Direct Port
Smart Battery Shunt IP65 Water Proof Rating
The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
Ideal for Monitoring batteries on your boat, or in damp conditions thanks to the IP65 rating
Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.
The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.
The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.
Smart BatteryProtect 24/12 from Victron Energy
The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
When using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set.
Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual).
If required, Bluetooth can be disabled.
The Smart BatteryProtect is a uni-directional device. It can only deal with current in one direction, so either current to a load, or current from a charger, but not both currents at the same time. In addition to this, current only can only flow from the IN terminal to the OUT terminal. In case of use with a load, the battery connects to the IN terminal, and in case of use with a charger, the charger connects to the IN terminal.
The Victron Energy Cerbo GX Remote Monitoring System
The all-new communication-centre allows you to always have perfect control over your system from wherever you are and maximises its performance. Simply connect through our Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or our VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.
- Remote Console via Victron VRM
- Ultra smooth Monitoring and Control
- HDMI Connectivity for Touch50 or Touch70 Screen
- Complete Control
- Bluetooth Enabled
This communication-centre allows you to always have perfect control over your system from wherever you are and to maximise its performance. Simply access your system via our Victron Remote Management (VRM) portal, or access it directly, using the optional GX Touch screen, a Multi-Functional Display (MFD) or our VictronConnect app thanks to its Bluetooth capability.
Victron GX Touch 50 Touchscreen Display for the Cerbo GX
The GX Touch 50 is a display accessory for our Cerbo GX. The five inch touch screen display give an instant overview of your system and allow to adjust settings in the blink of an eye. Simply connected to the Cerbo GX with one cable, Their super slim waterproof design, top-mountable setup and simple installation bring a lot of flexibility when creating a crisp and clean dashboard.
- Five inch Touch screen display
- Easy and quick mounting
- Slim and waterproof
Victron Energy VE.Direct Cable For Communication with GX Devices
The VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model. Please check our pricelist for all available models.
Historical Product Codes
SHU067150050BPR065022000
BMS300200000
ASS030530218
BPP900450100
BPP900455050
Available Downloads
There are no downloads available.
We provide a wide range of secure payment options including Debit & Credit Card, PayPal (with interest free Pay-In-3), Amazon Pay, Gpay and ApplePay.
You can enjoy total peace of mind when you shop online with Butler Technik.
Our site uses a secure payment gateway that encrypts your credit or debit card information, ensuring total protection of your payment details throughout your purchasing experience.
You also have the options of paying using your Amazon account, Google Pay on your android phone or ApplePay on your Apple device.
Shopping at Butler Technik is always simple, safe and secure.
Please Note: Delivery prices quoted are excluding VAT.
Deliveries are made from Monday to Friday excluding Bank and National Holidays.
Next Working Day Shipping* is available in UK Mainland for all orders placed before 15:00hrs. Orders placed after 15:00hrs will be dispatched the following working day on a next day service.
Orders placed on a Saturday or Sunday will be despatched the following Monday (except Bank Holidays) for expected delivery following business day (Tuesday).
For Next Business Day Delivery, please select Next Day.
Standard 2-day shipping* is available to Scottish Highlands and Islands orders placed before 15:00hrs on stocked items. Items are despatched promptly sameday. UK Courier services are typically 2 day delivery for remote UK postcodes.
WEEKEND deliveries in the UK may be possible if required at additional cost. For WEEKEND delivery quotation please call our Sales Team prior*
Standard carriage / Free-shipping - please allow 2-5 working days from clearance of payment for delivery. Typically however delivery is much quicker and 98% of orders are delivered to UK addresses within 24 - 48 hours after dispatch from warehouse.
Delivery Times - Deliveries are made Monday to Friday (excl. public holidays) typically 2-5 working days from date of order for in-stock items if the FREE DELIVERY option is chosen. An email will be sent to inform you of dispatch of goods and due delivery date. Next Day UK delivery may be selected at checkout for an additional cost.
- Free worldwide delivery will not be available if one of the following is applicable to your order:
- Your order has a total weight exceeding 18kgs
- You already have a discount code applied to your order
- Your basket contains a special order item that requires shipping additionally.
Our returns policy does not include manufacturer warrantable items. Please speak to our support department or email sales@butlertechnik.com if you believe your item has failed within warrantable circumstances, or if you wish to return an item for refund.
Refunds and Right to Cancel
You have the right to cancel your order within a 14 (fourteen) day "cooling off period", which starts the day after you receive your items. You can apply for a refund within 30 (thirty) days from the date of invoice.
Prior Notification of Intent
If you wish to cancel an order or submit a refund request under the UK Consumer Protections (Distance Selling) Regulations 2000, you must inform ButlerBus Technik Ltd of your intention to cancel or return your order by either phone, email or post within the 14 (fourteen) day cooling off period for order cancellation, or 30 (thirty) day period for refunds.
When Butlerbus Technik has received your request you will receive confirmation and given authorisation to return goods. Please quote and include your original invoice number. All goods must be in a re-saleable condition.
You will be required to return goods at your cost by an insured and trackable method. If goods go missing we will only consider a request for refund on proof of completed receipt/delivery of goods to Butler Technik from your nominated courier. Once we have received goods we will then issue you a full refund less any delivery charges.
If you are unable to arrange a return please contact us. We can arrange collection on your behalf but a charge will be made which will be deducted from your refund total.
If a delivery charge was made on the original purchase this will not be refunded as this is a service which is concluded at the point of order.
Orders that have already been processed and/or dispatched cannot be cancelled; they must be returned to ButlerBus Technik Ltd for refund following receipt of goods by customer.
We will do our very best to assist and enable a quick refund process upon receipt of returned items.
Thank you for your continued understanding during this process
Returns address
FAO: RETURNS
ButlerBus Technik Ltd
Bridge Road
Aubourn
Lincoln
LN5 9FD
United Kingdom
-
Specific Terms:
- All costs relating to return shipping of correctly supplied goods shall be the responsibility of the purchaser.
- ButlerBus Technik Ltd are not responsible for any shipping or insurance charges relating to return of goods.
- Please be aware that ButlerBus Technik Ltd may NOT be able to accept for full or partial refund/credit any items that have been prior installed by the customer before return. Such goods/components shall be deemed 'used' and therefore unable for subsequent resale.
- Specifically, but not exclusively, the return of prior installed electronic items used for purchaser diagnostic or trouble-shooting purposes shall not be considered for full refund.
- The decision to refund or partially refund prior installed items shall remain solely at the discretion of ButlerBus Technik Ltd.
- The decision to refund or partially refund goods returned beyond 30 days after original date of sale shall remain solely at the discretion of ButlerBus Technik Ltd.
Your statutory rights are unaffected by the above. Consumers other than Business trade customers are further protected by UK Consumer Protection (Distance Selling) Regulations 2000.
If you have any questions please ask our support department prior to returning any items.
Stock Alert
Please alert me via email when this product is back in stock.
Ask a question
Victron Battery Management System and Monitoring Kit
